Y3180H
The model Y3180H General-purpose Gear Hobbing Machine is applicable to cut spur and helical gears, worm wheels, sprockets, and short spline shafts in jobbing, small or batch production. It is characterized by good rigidity, high working accuracy, ease in operation, and simple setup procedure. Either conventional or climb method can be used in the machine. In addition, the machine is equipped with an automatic shout-down device and safety-securing mechanisms, and an automatic lubricating system. Imported hydraulic components can be used for the machine according to the customers' requirements. Furthermore, tangential hob head is also available for special order to cut worm wheels under tangential feeding mode.
| Description |
Y3180H |
Unit |
| Max. workpiece dia.(with workstay) |
550 |
mm |
| Max. workpiece dia.(without workstay) |
800 |
mm |
| Max. module |
10 |
mm |
| Least No. of teeth |
8 |
|
| Max. worktable speed |
5.3 |
r/min |
| Worktable bore dia. |
Φ80 |
mm |
| T-slot No. of worktable |
6 |
--- |
| Bolt for worktable T-slot |
6-M14×L |
--- |
| Hob speed and steps |
40 to 200
8-step |
r/min |
| Distance between hob axis and worktable surface |
235 to 585 |
mm |
| Min. center distance between hob and worktable |
50 |
mm |
| Distance between tailstock end face and worktable surface |
400 to 600 |
mm |
| Max. hob diameter and length |
180 × 180 |
mm |
| Max. hob swiveling angle |
240 |
degree |
| Total power |
8.5 |
kW |
| Overall dimensions L´W´H |
275×149×187 |
cm |
| Packing case dimensions L´W´H |
302×187×243 |
cm |
| Net / Gross weight |
5500/6500 |
kg |
Standard accessories: standard change gears; installation tooling; hob arbors of ¢27, ¢32.
WORKSHOP
FAQ
1. How can I choose the most suitable machines ?
A: You can choose the exact model by yourself. Or you can tell us your specifications, to let us choose the best model for you, too.
You can also send us the product drawing, and we will choose the most suitable machines for you.
.
2. When do you deliver?
A: It depends on the machine and model you choose. Mostly 1.5 months - 3 months. All machines are brand new, made according to your order. Occasionally there will be a few machines available from stock. You can send us a message or mail to check exact delivery time.
3. Is machine tested ?
A: The accuracy, noisy will be tested according to China GB standard.
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
5. What's the Payment Terms ?
A : T/T 30% down payment when order ,70% balance payment before shipment ;
Irrevocable L/C at sight also acceptable but it will subject additional bank fee.
6. Do you accept cash or L/C?
A: We accept T/T or L/C, all through banking system. We do not accept cash, 'cause we are an official registered company that all payment must go through official bank account.
7. What's the MOQ?
A: 1 set (Only some low cost machines will be more than 1 set)
8. How is the warranty?
A: 12 months after shipment date
9. If I have a problem setting up/ getting it running problem, will you be available by email to assist in solving the problem.
A: Video technical support, online service, we can answer you in 24 hours.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}