Customization: | Available |
---|---|
Type: | Horizontal Lathe |
Processing Accessory: | Disk and Shaft Type Parts |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
ITEM | SPECIFICATIONS |
SWING OVER BED | 1,800 mm |
SWING OVER CARRIAGE | 1,400 mm |
DISTANCE BETWEEN CENTERS | 6,000 mm |
SUPPORT WEIGHTS BEWTEEN CENTERS | 32 TON |
WIDTH OF BED | 1,600 mm WITH FLAT 3 GUIDEWAYS |
SPINDLE SPEED | 3 STEPS, 0.8 TO 160 RPM |
TORQUE OF FACEPLATE | 80 kNm |
DIAMETER OF SPINDLE ON THE FRONT SUPPORTING | 320mm |
SPINDLE TAPER HOLE | 140 mm; 1:7 |
BEARINGS IN SPINDLE | NSK OF JAPAN |
DIAMETER OF CHUCK | 1,600 mm |
TRAVEL OF X-AXIS | 800 mm |
TRAVEL OF Z-AXIS | 6000 mm |
FEEDING SPEED IN X-AXIS | 1 TO 1000 mm/min |
FEEDING SPEED IN Z-AXIS | 1 TO 1000 mm/min |
RAPIDN TRAVESE IN X-AXIS | 4,000 mm/min |
RAPIDN TRAVESE IN Z-AXIS | 4,000 mm/min |
MAX. CUTTING FORCE OF TOOL POST | 70 KN |
TRAVEL OF TOOL ROW | 320 mm |
SIZE OF TOOL HOLDER | 70×70 mm |
RANGE OF THREADING | 1 TO 200 mm |
MOVEMENT OF TAILSTOCK QUILL | 250 mm |
TAPER HOLE OF TAILSTOCK QUILL | 100 mm; 1:7 |
TRAVERSE SPEED OF MOTORIZED TAILSTOCK | 2,500 mm/min |
TRAVERSE SPEED OF QUILL IN TAILSTOCK | 10-200 mm/min |
POWER OF MAIN MOTOR WITH ADJUSTING SPEED DEVICE | DC 75 KW |
ADJUSTING SPEED DEVICE FOR MAIN MOTOR | 6RA70 OF SIEMENS |
CONTROL SYSTEM | SIEMENS 828D |
SERVO MOTOR FOR X-axis & Z-axis | 41 Nm |
BALLSCREW OF X-AXIS | MADE BY GERMANY |
REDUCER OF of Z-AXIS | MADE BY Europe |